Technical Specifications
334627K
45
Technical Specifications
InvisiPac GM100 Plug-Free Melt Adhesive Applicator
US
Metric
Speed
> 10,000 cycles/minute
Heat-up time
< 10 minutes to 350° F at 240 VAC < 10 minutes to 176° C at 240 VAC
Maximum fluid working pressure
1500 psi
10.3 MPa, 103 bar
Maximum air pressure
80 psi
0.5 MPa, 5.5 bar
Minimum air pressure
65 psi
0.44 MPa, 4.4 bar
Maximum operating temperature
400° F
204° C
Ambient storage temperature range
32°–122° F
0°–50° C
Ambient operating temperature range
32°–122° F
0°–50° C
Solenoid air flow rating
1.0 Cv
Electrical Service
Slim
200-240 V, 50-60 HZ, 150 W
Dual Low Profile
200-240 V, 50-60 HZ, 300 W
Quad Low Profile
200-240 V, 50-60 HZ, 375 W
Dual Standard
200-240 V, 50-60 HZ, 300 W
Quad Standard
200-240 V, 50-60 HZ, 375 W
Cordsets
24W087, 25E783, or 24X760
Pt 100 (385) RTD
24W088, 25E784, or 24X761
Ni 120 RTD
Solenoid Control Voltages
24X038
24 VDC
Materials of Construction*
Wetted materials on all models
Aluminum, carbon steel, stainless steel, carbide, brass, chemically
resistant seals, chrome
Noise (dBa)
Sound pressure measured 6.5 feet (2 m)
from the applicator at 80 psi (550 KPa, 5.5
bar) per ISO-3744.
Without mufflers:
89.2 dBa
With mufflers:
78.4 dBa
Notes
* All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR)
Title 21 for repeated use in food-processing machinery. The applicator user must verify that the construction
materials meet their specific application requirements.
Summary of Contents for InvisiPac GM100 Plug-Free
Page 25: ...Repair 334627K 25 Notes ...