Technical
Technical
Technical Specifications
Specifications
Specifications
Air
Air
Air---Assisted
Assisted
Assisted Waterborne
Waterborne
Waterborne Isolation
Isolation
Isolation System
System
System
U.S.
U.S.
U.S.
Metric
Metric
Metric
Maximum Fluid Working Pressure
3000 psi: WMBH00, WMBH01,
WMBH20, WMBH40, WMBH41
1500 psi: WMBH04, WMBH05,
WMBH44, WMBH45
20.7 MPa, 206.8 bar: WMBH00,
WMBH01, WMBH20, WMBH40,
WMBH41
10.3 MPa, 103.4 bar: WMBH04,
WMBH05, WMBH44, WMBH45
Maximum Fluid Inlet Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Air Working Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum System Inlet Air
Pressure
70 psi
0.48 MPa, 4.8 bar
Maximum System Inlet Air
Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Fluid Operating
Temperature
120°F
48°C
Short Circuit Current Output
150 microamperes maximum
Voltage Output
H60T18: 60 kV
H60M18: 30-60 kV
Sound Power (measured per ISO
Standard 9216)
at 40 psi: 90.4 dB(A)
at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)
at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m
from gun)
at 40 psi: 87.0 dB(A)
at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A)
at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Gun Air Outlet Fitting
1/4 npsm(m)
Gun Fluid Outlet Fitting
1/4 NPSM
Isolation System Air Inlet Fitting
1/2 npt
Isolation System Fluid Inlet Fitting
1/4 in. npsm(m)
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal,
Nylon, Polyethylene, Tungsten Wire
Waterborne Fluid Hose: FEP
Isolation System: Polyethylene, Stainless Steel, Acetal,
Fluoroelastomer, PTFE, UHMWPE, Polyurethane, Tungsten carbide
with 6% nickel
Maximum Fluid Conductivity
2000 μS/cm
Maximum Fluid Hose Length,
Maximum Inside Dimension
100 ft.,
.16 in.
30.5 m,
4 mm
Weight
322 lb
146 kg
Ambient temperature range
41F–122F
5C–50C
System Air Consumption
(including gun)
Required turbine air flow: 6 scfm 170 l/min
Range of total air flow under normal spraying conditions:
15–20 scfm 425–565 l/min
146
3A7370C
