![background image](http://html.mh-extra.com/html/graco/hnhb7-series/hnhb7-series_instructions-manual_2251716011.webp)
Installation
3A0138J
11
Flushing
Before installing meter or dispense valve to end of hose, flush supply line with a solvent compatible with the fluid you
are dispensing.
1.
Place end of hose in waste container.
2.
Blow out entire lubricant supply line with air.
3.
Flush equipment with a compatible solvent until fluid
runs clear.
4.
Pump dispensing lubricant through line until all sol-
vent is flushed out.