Hydraulic Oil/Filter Change
3A3426EOperation
55
Hydraulic Oil/Filter Change
Removal
1. Perform
2. Place drip pan or rags under sprayer to catch
hydraulic oil that drains out.
3. Remove drain plug. Allow hydraulic oil to drain.
4. Unscrew filter slowly - oil runs into groove and
drains out rear.
Installation
1. Apply a light film of oil on filter gasket. Install drain
plug and oil filter. Tighten oil filter 3/4 turn after
gasket contacts base.
2. Fill with five quarts of sythetic hydraulic oil, ISO 46
with a viscosity index (VI) of 154 or higher.
3. Check oil level.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid and moving parts, follow the Pressure Relief
Procedure when you stop spraying and before
cleaning, checking, or servicing the equipment.
ti2271a
199
Summary of Contents for High Production Series
Page 25: ...Cleanup 3A3426EOperation 25 Standard Series ...
Page 26: ...LineLazer V LiveLook Display 26 3A3426EOperation LineLazer V LiveLook Display Standard Series ...
Page 56: ...Wiring Diagram 200HS Standard Series 56 3A3426EOperation Wiring Diagram 200HS Standard Series ...
Page 58: ...Wiring Diagram 200DC Standard Series 58 3A3426EOperation Wiring Diagram 200DC Standard Series ...