Setup
30
313855K
5.
From the pull-down menu, select ON.
6.
Press ENTER.
7.
Use the Arrow keys to move the cursor over the
DELAY TIME field.
8.
Press ENTER.
NOTE: Time is displayed in MM:SS.
9.
Use the UP/DOWN arrows to move up and down
through the numbers 0-9 until the first number in the
DELAY TIME is displayed in the field.
10. Use the RIGHT arrow to move the cursor to the next
field. Repeat step 9.
11. Repeat steps 9 and 10 until the desired time is dis-
played.
12. Press RESET. The Main Screen, page 24 displays.
PULSED Setup
For systems requiring power to the pump to be turned
on and off during a lubrication event, the user can utilize
the pulse mode.
1.
Use the UP/DOWN Arrow keys to move the cursor
over PULSED.
2.
Press ENTER to display the PULSED setup screen.
F
IG
. 40
F
IG
. 41
