2
Fitting the Child Restraint
with the 3-Point Lap &
Diagonal Seat Belt
Position the child restraint
on the vehicle’s seat.
1 Thread the diagonal of the
vehicle seat belt underneath
the head rest as indicated
with the red tag, and the lap
strap between the base of
the child restraint and the
armrest of the child restraint
as indicated with the red
tag. Pull the vehicle seat belt
out as much as it will go
so there is lots of slack and
feed in through the seat belt
route slot in the seat’s plastic
backrest furthest from the
vehicle’s seat belt buckle as
indicated with the red tag.
2 Feed the belt buckle
around the back of the child
restraint over the harness
straps and back through
the opposite seat belt route
slot, to the front of the child
restraint.
3 Pull the buckle through
the slot and push the child
restraint firmly against the
backrest of the vehicle’s seat.
4 Feed the buckle and both
the diagonal and lap straps
between the armrest
and the base of the child
restraint as indicated with
the red tag.
9
For 9 – 18kg
2
1
4
3
