Graco EcoQuip 300, Operation, Repair, And Parts

Page: 32 / 46

Repair
Replacing Replacing Replacing the the the DataTrak DataTrak DataTrak Battery Battery Battery
FIRE FIRE FIRE AND AND AND EXPLOSION EXPLOSION EXPLOSION HAZARD HAZARD HAZARD
To reduce the risk of fire and explosion, the battery
must be replaced in a non-hazardous location.
Use only an approved replacement battery (see
table). Use of an unapproved battery will void
Graco’s warranty.
Replace Replace Replace Battery Battery Battery
1. Unscrew cable from the back of the reed switch
assembly.
2. Remove the cable from the two cable clips.
3. Remove the DataTrak module from the bracket.
Take the module and attached cable to a
non-hazardous location.
4. Remove the two screws on the back of the
module to access the battery.
5. Disconnect the used battery and replace it with
an approved battery.
Approved Approved Approved Batteries Batteries Batteries
Energizer alkaline #522
Varta alkaline #4922
Ultralife lithium #U9VL
Duracell alkaline #MN1604
32 334143C