![background image](http://html1.mh-extra.com/html/graco/ecoquip-2-eq200t-elite/ecoquip-2-eq200t-elite_instructions-manual_2251466020.webp)
Operation
20
3A7467C
7. Open the pot dump valve (J) until the pot pressure
gauge (L) reads 0 psi.
8. Close the pot dump valve (J), Turn the selector
valve (W) to OFF.
Adjust Blast Pressure
1. Perform the
2. Perform the
3. Trigger the blast control switch (B).
4. Adjust the blast air regulator (R) until the desired
pressure appears on the blast pressure gauge (V).
NOTE:
Do not increase directly to blast pressure.
Always set below the desired pressure, then
increase to the actual setpoint.
5. Disengage the blast control switch (B).
WLE
L
J
To avoid injury due to a spray from wet media from
the pot, always
the abrasive ball valves (M) and engaging the blast
control switch (B).
ti36968a
B
ti36969a
R
Summary of Contents for EcoQuip 2 EQ200t Elite
