![background image](http://html1.mh-extra.com/html/graco/e-flo-sp/e-flo-sp_installation-and-parts-manual_2253500032.webp)
Kits and Accessories
32
3A6586D
2.
Ensure the wall mount is level using the wall bracket
as a template. Drill four 7/16 in (11 mm) diameter
holes for the mounting bolts. See
Figure 27
for the
mounting hole fastener locations.
3.
Bolt the bracket securely to the wall.
4.
Use the screws and washers supplied with the wall
mount and refer to the
Electric Driver Mounting
Hole Pattern
on page
to mount the driver to the
bracket once it is secured to the wall.
Floor Mount Adapter, 223952
Refer to the
Floor Stand Mounting Hole Diagram
on
page
and the Floor Stand Accessory manual for
proper installation of this floor mount adapter. See
Related Manuals
on page
.
CAN Cables
The following CAN cables and splitter are available for
use with E-Flow SP electric pumps.
Light Tower Kit, 255468
For D200s, D200, and D60 single supply systems.
See the Light Tower Kit manual for more information.
I/O Cable, 122029
See the E-Flo SP Software Instructions manual for
setup and pin out information.
F
IG
. 27: Wall Mount Hole Locations
F
IG
. 28: Floor Mount Stand
Ref
Part
Description
Qty
801
186562
PLATE, mounting inductor
1
802
186560
TUBE, adapter
1
803
186561
COUPLING, pipe
1
804
166538
PLATE, base
1
806
185542
COUPLING, half
1
Mounting Hole
Locations
806
804
803
802
801
Part
Description
Length
125306
CABLE, CAN, female/female
0.3 m
123422
CABLE, CAN, female/female
0.5 m
121000
CABLE, CAN, female/female
0.5 m
121227
CABLE, CAN, female/female
0.6 m
121001
CABLE, CAN, female/female
1.0 m
121002
CABLE, CAN, female/female
1.5 m
121003
CABLE, CAN, female/female
3.0 m
120952
CABLE, CAN, female/female
4.0 m
121201
CABLE, CAN, female/female
6.0 m
121004
CABLE, CAN, female/female
8.0 m
121228
CABLE, CAN, female/female
15.0 m
123341
CABLE, CAN, female/female
40.0 m
121807
CONNECTOR, splitter, male/male
Part
Description
Length
122029
CABLE, GCA, M12-8p
15.0 m