Graco E-flo iQ 26B543, Installation-Parts

Page: 29 / 80

Setup
3A8217A 29
Heat Connections (Hoses and
Accessories)
1. Connect heated hoses (with circular electrical
connectors) to Heat Control Box Ports 1, Port 2 or
Port 3 (C5).
2. Connect heated accessories to the square electrical
connector end of each heated hose that is used.
Example 1: Single system with two heated hoses and
one heated dispense valve.
• Hose 1 - Circular electrical connection to Port 1
(C5).
• Hose 2 - Circular electrical connectors to Port 2
(C5). *
• Heated valve - Square electrical connections from
hose 2 to Axial Dispense Valve (B). See F
IG
. 25.
Single System Example
Note: port 4 is always used for heated pump. Port 5 is
always used for heated platen.
* Requires Heat Extension Cables . See page 63.
F
IG
. 25
Hose 1
Hose 2 *
C5 - Port 1
C5 - Port 2
Single system includes:
• One or two heated hoses
• One heated valve