Graco Dyna-Star 24Y407, Instructions, Repair And Parts

Page: 22 / 24

Technical Data
)
Pump Module with Auto-Fill Shutoff US Metric
Maximum hydraulic input pressure 3500 psi 24.0 MPa, 240 bar
Pump wetted parts see manual 312350
Vent valve wetted parts see manual 309099
Reservoir wetted parts steel, buna-n rubber
Maximum delivery @ 60 cpm
1.1 lb/min, 34.8 in
3
/min 570 cm
3
/min
Regulated hydraulic pressure operating range 250 to 350 psi 1.7 to 2.4 MPa, 17.0 to 24.1 bar
Hydraulic flow rate operating range 0.5 to 3.0 gpm 1.9 to 11.4 liter/min
Maximum hydraulic fluid temperature 200°F 93.33°C
Lubricant outlet pressure range 2500 to 3500 psi
17.0 to 24.0 MPa, 170 to 240
bar
Fill port size - Auto-fill Shutoff 3/8 inch npt (F
IG
. 2, S, page 7)
Hydraulic inlet port size 3/8 inch nps swivel (F
IG
. 9, Y, page 11)
Hydraulic tank line size 3/4 inch nps swivel (F
IG
. 9, Z, page 11)
Lubricant outlet port size 1/2 inch nps swivel (F
IG
. 2 U, page 7)
Grease capacity
Model 24Y407, 25C949 90 lb. 41 kg
Model 24Y408, 25C948 60 lb. 27 kg
Mounting holes for pump module six, 7/16 inch holes on 13 7/8 inch bolt circle
Reservoir diameter 12 3/4 inch 324 mm
Pump module height
Model 24Y407, 25C949 42.75 inch 1086 mm
Model 24Y408, 25C948 35.15 inch 893 mm
Electrical requirements Timed 24 VDC signal
Electrical power requirements 14.7 Watts
Filtration (hydraulic fluid) 10 µ (microns) or better
Sound Pressure* 77 dB(A)
*Sound pressure reading taken with pump operating at 66 cycles per minute. Sound pressure measured per
CAGI-PNEUROP, 1971.