manualshive.com logo in svg

Graco Contractor PC, Operation, Parts, Repair

Share
Download
Graco Contractor PC Operation, Parts, Repair Download Page 14

Repair/Replacement 

14

3A6285D

8. Install new cartridge (2) into the gun 

and tighten until it fully bottoms out. 
There should be no gap in the 
indicated area below (a).

9. Push trigger assembly (13) back 

down into spray position. The push 
pins(11) should snap back out to 
normal position when trigger 
assembly (13) is fully engaged. 
Verify the cartridge is installed 
correctly by making sure the trigger 
assembly (13) can wiggle back and 
forth.

NOTE: 

Do not operate the gun if the 

cartridge is not installed correctly.

10. Reinstall tip (26) and guard (25).

Aligning Handle

If when tightened securely, handle no 
longer matches up with housing, realign 
handle.

1. Relieve pressure. See 

Pressure 

Relief Procedure

, page 5. Engage 

trigger lock (15).

2. Tighten handle (10) securely.
3. Loosen set screw (9) using a 1/8” 

Allen Wrench.

4. Rotate handle (10) so it is aligned 

with housing (1).

5. Tighten set screw (9) securely.

No Gap (a)

Summary of Contents for Contractor PC

















Reviews:

No comments

Brands by name

Popular brands

Load more brands