Maintenance
3A6941B
35
29. Tighten the retaining nut (9) with a wrench (torque
30 ft-lb/40.1 N•m) to secure (F
. 64).
30. Remove the two bolts (6) and two nuts (7) (F
31. Place the protection cover (8) in place and secure
with bolts (6) and nuts (7) (not shown) (F
. 66).
32. Place the o-ring (2) and attach the motor (1) to the
pump using the four bolts (3) (torque 11 ft-lb/14.9
N•m) (F
. 67).
F
IG
. 64
F
IG
. 65
9
6
F
IG
. 66
F
IG
. 67
8
6
2
3
1
Summary of Contents for Compact Dyna-Star
