background image

Warnings 

2

311306E

Warnings

The following general warnings are for the setup, use, grounding, maintenance, and repair of this 
equipment. Additional, more specific warnings may be found throughout the body of this manual 
where applicable. 

Symbols appearing in the body of the manual refer to these general warnings. 

When these symbols appear throughout the manual, refer back to these pages for a description 
of the specific hazard.

WARNING

FIRE AND EXPLOSION HAZARD 

When flammable fluids are present in the work area, such as gasoline and windshield 
wiper fluid, be aware that flammable fumes can ignite or explode. To help prevent fire 
and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources, such as cigarettes and portable electric lamps. 

Keep work area free of debris, including rags and spilled or open containers of sol-
vent and gasoline.

Do not plug or unplug power cords or turn lights on or off when flammable fumes 
are present.

Ground all equipment in the work area.

Use only grounded hoses.

If there is static sparking or you feel a shock, 

stop operation immediately.

 Do not 

use equipment until you identify and correct the problem.

Keep a fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD 

Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power at main switch before disconnecting any cables and 
before servicing equipment.

Connect only to grounded power source.

All electrical wiring must be done by a qualified electrician and comply with all local 
codes and regulations.

PERSONAL PROTECTIVE EQUIPMENT 

You must wear appropriate protective equipment when operating, servicing, or when in 
the operating area of the equipment to help protect you from serious injury, including 
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes 
but is not limited to:

Protective eyewear 

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

Summary of Contents for APEX 260105















Reviews: