Place car seat
rear-facing
on vehicle seat.
(Refer to illustration on Page 9)
Thread vehicle lap belt through car seat
Slots
and buckle belt.
NOTE:
Vehicle shoulder belt must
NOT
be
placed through car seat
Slots
.
Press down firmly on car seat to compress
vehicle seat cushion while tightening vehicle
lap belt
(fig. a)
.
Pull front to back and left to right to check for
secure installation
(fig. b)
. Vehicle lap belt
MUST
stay tight.
If not secure, see “Vehicle Seat Belts” section.
Check level indicator on car seat.
Ball
MUST
be entirely in green zone
(fig. c)
. If
necessary place rolled
Towels
under car seat
at vehicle seat crease.
NOTE:
Vehicle
must
be on level ground and
child in car seat when leveling.
INSTALLATION
WITHOUT
BASE
1
2
3
4
5
6
8
Adjust handle to a position behind car seat.
