Graco 333586E, Installation Manual

Page: 30 / 102

Setup
30 333586E
c. Connect Tandem Hose 1 (L) and Tandem Hose
2 (M) from the supply system to the Tandem
Block (R). See F
IG
. 23.
d. Connect Supply Hose 1 (C) to the Tandem
Block (R). See F
IG
. 23.
6. If you are using two supply hoses (C and D), use the
Supply Hose 1 to Supply Hose 2 Fitting (F) to
connect Supply Hose 1 (C) to Supply Hose 2 (D).
See F
IG
. 24.
NOTE: If using heated hoses, make sure the electrical
connections of each hose are oriented correctly, with
the circular electrical connector facing the Ram. See
F
IG
. 1 on page 11 for proper hose orientation on the
system.
7. Connect the Supply Hose 2 to Swivel Fitting (G) to
the Swivel Fitting (H).
8. Connect the Swivel to Valve Fitting (J) to the
Dispense Valve (B) as shown in F
IG
. 26.
9. Connect the Swivel Fitting (H) to the Dispense
Valve (B) at the Swivel to Valve Fitting (J) that was
connected in step 8.
F
IG
. 22
F
IG
. 23
F
IG
. 24
E, N, P
L, M, C
C
R
L
M
F
C
D
F
IG
. 25
F
IG
. 26
F
IG
. 27
G
H
J
B
J
B
H