10
309180
Electrical Setup
NOTE:
Required voltage and amperage will be noted
on the machine I.D. plate. Before running power to the
unit, make sure the machine electrical requirements on
the I.D. plate are compatible with the plant electrical
service.
Follow the procedure below for electrical setup.
1.
Securely tighten 16–pin electrical connectors on
long heated hose leads into 16–socket receptacles
located on the back of the electrical control panel
(Fig. 7).
Fig. 7
PH00016
2.
Securely tighten 8–socket electrical connectors on
short heated hose leads into 8–pin receptacle
located on the dispense valves (Fig. 8).
Fig. 8
PH00017
