![background image](http://html1.mh-extra.com/html/graco/308950/308950_instructions-parts-list-manual_2251217006.webp)
6
308950
Setup
Keypad and Display
The keypad and display are shown below with explanations.
TIME button
TIMER light
Display
UP button
DOWN button
RESET button
POWER light
PUMP ON light
ALARM light
LOW LEVEL light
INDICATOR lights
8858A
PUMP ON light: Indicates that the Lubrication Controller is in the
Pump On mode, and the device (air solenoid
valve) connected to terminals 4 and 6 should be receiving power.
Display: TIMER light on: Display indicates time remaining in hours and minutes until the next
Pump On cycle.
PUMP ON light on: Display indicates time remaining in minutes and seconds in the
Pump On cycle.
ALARM light on: Display indicates alarm codes (see page 8).
INDICATOR lights flashing: Display indicates that the Lubrication Controller is counting down to
the next
Pump On cycle.
INDICATOR lights steady: Display indicates that the Lubrication Controller is in
Suspended
mode, activated by contacts 14 and 15 being close-circuited.
TIMER light: Indicates that the Lubrication Controller is in
Timer mode.
UP button: For toggling between options in the System Set-Up Menu. Press this button and the DOWN button at
the same time to enter the System Set-Up Menu.
TIME button: For advancing to the next option in the Time Menu.
DOWN button: For adjusting settings in the Time Menu. Press this button and the UP button at the same time to
enter the System Set-Up Menu.
POWER light: Indicates that power to the Lubrication Controller is on.
RESET button: For resetting an alarm malfunction. Resets to the start of a lube cycle –– pushing this button
activates Lubrication Controller to open solenoid and start pump. Will activate a manual lube cycle and resets
pause interval.
LOW LEVEL light: Indicates that the reservoir fluid level is low.
ALARM light: Indicates that an alarm is activated.
Summary of Contents for 308950
Page 11: ...11 308950 Notes ...