A S S E M B L Y I N S T R U C T I O N S
(continued)
PRINTED IN CHINA
8
Figure 6
LaJobi Industries. - 257 Prospect Plains Rd. Cranbury,NJ 08512-Phone: 888-266-2848
Model shown is example only.
Styles may vary.
Bulletin No. A-DT00-00
Figure 5
Step 6
Place the Foam Pad(O) onto the Thick Shelf(E)
on top of the attached strap from Step 5 ,as
shown in Figure 6 .
Model shown is example only.
Styles may vary.
WARNING: FALL HAZARD
ALWAY KEEP CHILD WITHIN AN ARMS REACH.
E
Step 5
Place the Restraint Harness(N) and
align the hole on the Harness Strap
end to the hole on the thick shelf
(E).Attach the Strap to the shelf by
inserting an Allen Head bolt (H)
through a washer (I),the Strap(N) and
the Shelf hole.Secure with a Nut (J)
on the underside of the shelf, as
shown in Figure 5. Repeat process to
attach the other side of the strap to the
shelf.
N
H
I
J
L
N
RESTRAINT HARNESS SYSTEM USE:
.
Place the infant on the Dressing/Changing Table
Foam Pad.
.
Position the Restraint Harness over the middle
of the infant’s torso and insert the buckled ends
into each other until they lock shut with a click.
.
Gently pull the loose end of the strap to lightly
snug the Restraint Harness around the infant.
!
