background image

Most problems have a simple  

solution. First, check that:

• Power is turned ON for both units 

• Both units are plugged in (or batteries are 

fresh in Parent Unit) 

• Electrical outlet works 

• Volume is turned up on Parent Unit 

• Parent Unit is in range of the Nursery Unit

No Sound

• Battery dead or weak — replace or use AC 

adapter. 

• AC adapter not properly connected — 

check the connections. 

• Nursery Unit covered or blocked — 

remove the obstruction.

Weak Sound

• Nursery Unit too far from baby — move 

closer. 

• Large objects blocking the signal — try 

repositioning Nursery Unit. 

• Volume setting too low — turn it up.

DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter 

and/or receiver can void the operator’s authority to operate the equipment.

Static

• Interference from other electrical  

equipment — eliminate cause of static 
(TVs, mixers, computers, fans, fluorescent 
lights, light dimmers, etc.) 

• Parent Unit too far from Nursery Unit — 

move them closer. 

• Significant amount of obstructions 

between Parent Unit and Nursery Unit such 
as walls, ceilings & buildings.  Try moving 
the Nursery Unit to another part of the 
room.

• Change channel on Nursery Unit.

Shrill Sound (Feedback)

• Nursery Unit and Parent Unit too close 

together —  move them farther apart. 

• Volume set too high — lower the volume.

TroubleShooting

6

Summary of Contents for 2L00 Simple Sounds













Reviews: