background image

New Valve Installation 

4

311341A

New Valve Installation

1.

Install new directional valve as follows (see F

IG

. 6):

a.

Turn valve upside down. Pull out and discard 

clear plastic plug.

b.

Ensure the four o-rings are in place.

c.

Mount valve using the four new 2 in. socket 

head cap screws provided in kit. Tighten screws 

firmly using hex key.

2.

Unscrew knob on left solenoid and remove solenoid 
from shaft. Do not loose the three o-rings (see F

IG

7).

3.

Remove and discard threaded plug from hole in new 
valve.

4.

Install elbow connector and tighten brass fitting on 
connector using open-end wrench.

5.

Reinstall solenoid and knob removed in Step 2.

F

IG

. 6: New Valve Bottom

Discard

Check O-rings

F

IG

. 7: Connector Installation

O-rings

O-rings

O-rings

Discard

Reviews: