Related Manuals
2
3A5656A
Contents
Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remove and Replace the HMI . . . . . . . . . . . . . . 3
Load the PLC Software . . . . . . . . . . . . . . . . . . . . 6
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Kit 26C194 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Related Manuals
Overview
These instructions are for replacing the Human Machine
Interface (HMI) component of PD44 system control
boxes. Replacement involves removing the existing
HMI, installing spacers in the opening of the control box
front panel to accommodate the new HMI, and replacing
cables.
This kit 26C194 should be used to replace the HMI on
both the pneumatic valve and motor-driven versions of
the PD44 control boxes. Important features of this
replacement kit include:
•
The new HMI is slightly different in size than the pre-
vious version so spacer angles are included in the
kit to allow for proper mounting of the HMI.
•
A new DC power connector is included with the
HMI. The wiring will need to be removed from the
existing power connector and wired to the new one.
•
New retaining clips are included to secure the HMI
to the control box front panel.
Contact Graco Ohio Technical Assistance at
800-746-1339 or [email protected] for additional
information or assistance with this replacement kit.
Part
Description
313876
PD44 Metering Valves and Feed Systems,
Operation-Maintenance
313877
PD44 Control Box, Setup-Operation
3A0987
PD44 Metering Valves and Feed Systems,
Parts
