Operation
3A8307D
11
Dispense Instructions
To reduce the risk of serious bodily injury, including
fluid injection,
never
exceed the maximum working
pressure of the valve you are using or the lowest
rated component in your system.
NOTICE
The preset mechanism of the valve releases the trig
-
ger latch and allows the trigger to return to the
closed position. Manually holding the trigger in the
open position defeats this preset mechanism. The
correct operation is latching the trigger in the open
position then releasing the grip on the trigger.
Hands-on operation is recommended to prevent the
metered valve assembly from being dislodged from
the dispense position during a dispense and to pre
-
vent accidental over dispensing in the event of a
malfunction.
Do not latch the trigger in the event of bAtt low
battery display or when the display is blank. The
solenoid, which is used to stop dispenses, will not
function without power.
