Graco 25M404, Instructions Manual

Page: 17 / 32

Menu Screens
3A6711C 17
Menu Screens
Main Menu Screen
This screen provides access to the main
metered dispense valve functions:
•
DISPENSE, page 17
•
TOTAL, page 17
•
UTILITY MENU, page 18
Dispense Screen
The screen is used for dispensing fluid.
A Volume of fluid dispensed -
as fluid is dis-
pensed, this number increases to reflect the
quantity of fluid that is dispensed.
B Unit of measure, US or Metric.
For instruc-
tions for changing the units of measure see
Utility Menus, Set-Up, Units of Measure on
page 18
.
C RESET -
Resets the resettable totalizer back
to zero.
D MENU -
Takes meter back to Main Menu
screen.
Total Screen
E Non-Resettable Totalizer -
Lifetime running
total of the quantity of fluid dispensed
through the meter. The unit of measurement
displayed is determined by the Unit of Mea-
surement criteria selected in SET-UP (see
SET-UP, page 18). When Pints, Quarts or
Gallons are selected, the Unit of Measure-
ment will be shown as Gallons. When Liters
are selected, the Unit of Measurement will
be shown as Liters.
F Resettable Totalizer -
Running total of the
quantity of fluid dispensed through the meter
since the last time the total was reset.
The
unit of measurement displayed is deter-
mined by the Unit of Measurement criteria
selected in SET-UP (see SET-UP, page 18).
G GO BACK -
Takes meter back to Main Menu
screen .
H RESET -
Resets the Resettable Total (F)
back to zero.
Utility Screen
There are four functions available from the
Utility Menu Screen.
NOTE: Some screens provide additional
function screens when selected.
•
DEVICE INFORMATION, page 18
•
SETUP, page 18
•
RESET, page 20
•
GO BACK, page 20
F
IG
. 23
F
IG
. 24
A
B
D
C
F
IG
. 25
E
F
G
H