Appendix B - Data Exchanged
3A6338F
29
Below is a list of explanations of each individual Data
Exchange Element.
Dispense Mode
Dispense Mode tells the EFR system whether the
system is in weight or volume mode. The following
values correspond to the various dispense modes
offered by the EFR.
ADM Rate Units
ADM Rate Units tells the EFR system what units the
rate will be displayed in on the ADM. The following
values correspond to the various rate units the EFR
ADM offers.
44
Sequence Inlet Pressure for Blue Pump (XXXX.X bar)
uint16
45
Voltex Dynamic Mix Valve, Motor Target Speed (XXXX rpm)
uint32
46
Voltex Dynamic Mix Valve, Motor Ramp Up Time (XXXX ms)
uint32
47
Voltex Dynamic Mix Valve, EFR Dispense Wait Enable
bool
48
Voltex Dynamic Mix Valve, Air Nucleation Enable
bool
49
Voltex Dynamic Mix Valve, Air Nucleation Delay Time (XXXX
ms)
uint32
50
Voltex Dynamic Mix Valve, Air Nucleation On Time (XXXX ms)
uint32
51
Voltex Dynamic Mix Valve, Air Nucleation Off Time (XXXX ms)
uint32
52
Voltex Dynamic Mix Valve, Actual Motor Speed (XXXX.X rpm)
uint32
53
Voltex Dynamic Mix Valve, Red Valve Pressure (XXXX.X bar)
uint32
54
Voltex Dynamic Mix Valve, Blue Valve Pressure (XXXX.X bar)
uint32
55
Red Tank Refill Setting
uint8
56
Red Tank Refill Timeout (XX minutes)
uint32
57
Red Tank Sensor Configuration Installed
uint8
58
Blue Tank Refill Setting
uint8
59
Blue Tank Refill Timeout (XX minutes)
uint32
60
Blue Tank Sensor Configuration Installed
uint8
61
Recirculation Flow Rate (xxxx cc/min)
uint16
62
Park Using Recirculation Valves Enabled
bool
63
Park After Recirculation is Completed Enabled
bool
64
Recirculation Mode
uint8
65
Recirculation Timer On Time (xx minutes)
uint16
66
Recirculation Timer Off Time (xx minutes)
uint16
67
Recirculation Timer Time Remaining (xx.x seconds)
uint16
Data Exchange Element
(base 10 integer)
Description
Data Type
Value
Dispense Mode State
0
Weight Mode
1
Volume Mode
Value
Rate Units State
0
Per Minute
1
Per Second
2
Per Hour
