Instructions
Proximity Switch Cable
Flying lead cable with LED and adapter cables for use with 10-32 VDC, single control, PNP,
proximity switch.
Not approved for use in European explosive atmosphere locations.
Part Nos.:
24Z714 - Cable, M12 to 5 Pin, NPN Adapter*
24Z715 - Cable, M12 to 3 Pin, NPN Adapter*
24Z716 - Cable, M12 to 4 Pin, NPN Adapter*
24Z719 - Cable, M12 to 4 Pin, PNP
24Z720 - Cable, M12 with PNP LED to Flying Leads, PNP, 90°, 5m
26A782 - Cable, M12 with PNP LED to flying Leads, PNP, 90°, 10m
25M604 - Cable, M12 with PNP LED to Flying Leads, PNP, Straight
25M602 - Cable, M12 with NPN LED to Flying Leads, PNP, Straight**
25M603 - Cable, M12 with NPN LED to M12, PNP Straight**
*NPN adapter cable connects to the PNP switch and inverts the signal to NPN for the controller.
**When LED indication is desired on a G3 Max, G3 SP, or G3 DMS pump, an NPN LED configuration is needed. The
sensor output is still a PNP switch.
Related Manual
Important Safety Instructions
Read all warnings and instructions in this
manual and the instructions included with
your operating system or pump. Save
these instructions.
Manual No.
Manual Title
3A4144
Proximity Switch
3A4481F
EN
