Installation
2
334358A
Installation
1.
Shutdown the system. See InvisiPac system man-
ual for instructions.
2.
Remove the air fitting in the air solenoid valve on the
feed container (S). Replace with fitting (3) for 10 mm
tube.
3.
Remove the air fitting on the air manifold for the
applicator manifold. Replace with fitting (2) for 10
mm tube.
4.
Use fitting (1 or 4) on the end of the air filter for the
incoming air to the InvisiPac system.
Parts
Air Metric Fitting Kit 24W637
Graco Information
For the latest information about InvisiPac, visit
.
For technical assistance or customer service, call toll free: 1-800-458-2133.
F
IG
. 1
F
IG
. 2
3
S
ti20928a
2
ti21132a
F
IG
. 3
Ref.
Part
Description
Qty
.
1
127922 FITTING, 3/8 npt(m) x M18(f)
1
2
127923 FITTING, 1/4 npt(m) x 10 mm
tube
1
3
127924 FITTING, 1/4 npt(m) x 10 mm
90° elbow tube
1
4
127925 FITTING, 3/8-18 npt(m) x 3/8-19
bspt (f)
1
ti21147a
1 or 4
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions.
This manual contains English. MM 334358
Graco Headquarters:
Minneapolis
International Offices:
Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision A, August, 2014
