Setup
Setup
Setup Screens
Screens
Screens
The Setup Mode is used to set up a password (if
desired) and to set parameters for controlling and
monitoring fluid flow with the ProControl 1KE Plus.
See
Screen Navigation and Editing, page 29
, for
information on how to make selections and enter
data.
Setup
Setup
Setup Screen
Screen
Screen 1:
1:
1: Job
Job
Job Target
Target
Target
The Job Target screen is used to monitor the range
of sprayed fluid per job. When a job is logged, and
the dispensed volume is outside the limit, the alarm
will be turned on. A limit value of 0 turns off the alarm.
Table
Table
Table 9
9
9 Job
Job
Job Target
Target
Target Examples
Examples
Examples
Description
Description
Description
Job
Job
Job Target
Target
Target Screen
Screen
Screen
Event
Event
Event Log
Log
Log History
History
History Screen
Screen
Screen
Example with a minimum volume of
125 cc. The logged job was 115 cc, so
the alarm was activated.
Example with a range from 125 cc to
135 cc. The logged job was 138 cc, so
the alarm was activated.
Key
Key
Key
Enter the screen to set or change
preferences.
Press to activate a field for editing or
to accept the highlighted selection on a
menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Job dispense alarm range.
Key
Key
Key
Job dispense alarm enable (
).
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
3A6948A
43
