![background image](http://html1.mh-extra.com/html/graco/249570-a/249570-a_instructions-parts-list-manual_2251495019.webp)
Installation
311075ZAB
19
Fill the Wet-Cups
Keep the felt washers in the pump wet-cups saturated
with ISO pump oil. The lubricant creates a barrier
between the ISO and the atmosphere.
1. Fill the wet-cups through slots in the plate (222).
Alternatively, loosen screws and swing the plate
(222) aside.
Fill the Fluid Tanks
1. Mix the filled or separated materials in the pail with a
drill and mixing blade before adding to the tanks.
NOTE:
Material left in the tanks overnight may need to
be remixed in the tanks.
2. Lift the hose rack to expose tank A and tank B.
3. Remove tank A cover and pour ISO into tank A (red
side, with desiccant filter in cover). See F
4. Replace the cover
.
NOTE:
Desiccant filter is blue when fresh, and turns
pink when saturated. Be sure shipping plugs are
removed from openings on desiccant filter.
5. Remove tank B cover and pour resin into tank B
(blue side). See F
6. Replace the cover
.
Add thin coating of grease lubricant to tank o-ring
if lid is difficult to assemble to tank.
Pump rod and connecting rod move during operation.
Moving parts can cause serious injury such as
pinching or amputation. Keep hands and fingers away
from wet-cup during operation. Shut off Motor Power
before filling wet-cup.
TI6985a
222
F
IG
. 7 Fill Tank A with ISO
F
IG
. 8 Fill Tank B with Resin
1
1
1