2
309825
Install
1.
Follow
Pressure Relief Procedure
.
Fig. 1
78
2.
Loosen jam nut (78) and remove suction set.
Fig. 2
TI3134A
3.
Remove hopper lid. Insert hopper tube into pump.
Fig. 3
TI3150A
4.
Tighten jam nut until hopper does not move. Place
drain tube into hopper.
Fig. 4
TI3144A
6
5
5.
Loosen screw (6) and position hopper foot (5) until
sprayer feet and hopper foot are level. Tighten
screw.
TO PLACE AN ORDER OR FOR SERVICE
, contact your Graco distributor, or call
1–800–690–2894
to identify the nearest distributor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Sales Offices:
Minneapolis, Detroit
International Offices:
Belgium, Korea, Hong Kong, Japan
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
http://www.graco.com
PRINTED IN USA 309825 01/2003
