![background image](http://html1.mh-extra.com/html/graco/234413/234413_instructions-manual_2251485004.webp)
Set-Up
4
309925B
Installation
1.
Connect air hose to air inlet of gun and to air outlet
on cup regulator.
2.
Connect fluid hose to fluid inlet of gun and to cup
fluid outlet.
3.
Connect handle to top of cup.
4.
Pass air supply line through Air Control Unit to filter
dirt from air and extract water and oil. Connect air
supply hose to air inlet fitting on cup regulator.
Setting Gun Air Pressure
Set the gun air pressure regulator for the minimum
pressure needed to atomize your fluid. See your gun
manual for recommended settings.
Material Preparation
Follow manufacturer’s directions for mixing and
preparing material.
Strain material using a fine mesh screen in order to
prevent the entry of foreign matter and the clogging of
passageways.
The following information is for a typical
installation.
Spray Gun
Air Adjusting Valve (optional)
Atomizing Air
Fluid Line
Air Supply Hose
Air Compressor
Air Supply
Air Control Unit
Model 234413
2-liter Pressure Cup