background image

Technical Data

309523D

19

Technical Data

*Results are maximum readings taken at 6000 psi (41 MPa, 414 bar), with HD427 tip, using water. Sound power level

 was tested to ISO 3744-1981.

Dimensions

Maximum Working Pressure. . . . . . . . . . . . . . . . . . . . . . . 7250 psi (50 MPa, 500 bar)

Fluid Orifice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.090" (2.3 mm)

Fluid Inlet  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npsm(m)

Fluid Tube Inside Diameter . . . . . . . . . . . . . . . . . . . . . . . . 0.25” (6.4 mm)

Maximum Fluid Temperature  . . . . . . . . . . . . . . . . . . . . . . 160°F (71°C)

Sound Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dB(A)*

Sound Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111.6 dB(A)*

Wetted Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

stainless steel, polyethylene, nylon, polypropylene, acetal, 
carbide, plated steel

Weight (including tip and tip guard)  . . . . . . . . . . . . . . . . . 26 oz (745 g)

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5” (127 mm)

Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8” (203 mm)

Summary of Contents for 233889





















Reviews: