Instructions–Parts List
308069N
ENG
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Overspray Masking Liquid
System
For airspray application of fluids.
7545A
ÄÄ
ÄÄ
2700 psi (18.6 MPa, 186 bar) Maximum Working Pressure
80–90 psi (560–630 kPa, 5.6–6.3 bar) recommended regulated air inlet pressure
System
Model 224826
with Stainless Steel Pump*
Pump
Model 224825, Series A
Stainless Steel*
This pump is factory tested in oil. To avoid contami-
nating the masking liquid or the surface being
painted, flush the pump before immersing it in the
masking liquid. Use water only to flush. Paint sol-
vents will damage the seals. Follow the set-up
procedure carefully, and pay special attention to the
Flushing procedure on page 5.
CAUTION
