4
308154
Installation
9274A
101
23
24
204,205
203
202
104
103
202
206
1
7
Fig 2
18
A
NOTE: Fig. 2 shows the 55 Gallon Unit, Model
224701. See Fig. 3 for the 16 Gallon Unit, 224700.
1.
Install the wheels on the dolly, or assemble the
truck according to the instructions supplied with it.
2.
Put the drum on the dolly or truck. The truck has a
chain and clip (A) to secure the drum.
3.
Position the pump between the bung hole and vent
hole of the drum as shown in Figs. 2 and 3. Loos-
en the top screw (14) of each pump clamp (18),
and reposition the clamps as needed to fit the rim
of the drum. Tighten the screws (17) to secure the
pump to the rim of the drum.
4.
Install the wand storage tube (supplied). Place the
holder (206) on the lip of the dolly or truck. Place
the tube (202) in the holder, and slide the
bracket (203) over the tube. Align the bracket to
the holder, and secure the bracket to the rim of the
drum.
5.
Remove the drum’s vent hole cover, and install the
vented fluid gauge (23).
6.
Remove the drum’s bung hole cover and install the
plug (24). Put the 50” drain hose (1) into the drum
through the bung hole.
7.
Connect a wand (104)to the quick coupler (7).
Store the wand in the storage tube (202) until
needed.
