308584 51
Technical Data
Category
Data
Weight
1.87 lb (0.85 Kg)
Gun Length
9.5 in. (240 mm)
Maximum Working
Pressure
100 psi (0.7 MPa, 7 bar)
Air Pressure Operating
Range
0–100 psi (0–0.7 MPa,
0–7 bar)
Fluid Pressure Operating
Range
0–100 psi (0–0.7 MPa,
0–7 bar)
Voltage Output
0–65 kV*
Air Inlet
1/4 npsm(m) L.H.
Fluid Inlet
custom inlet for Graco
waterborne fluid hose
Fluid Specification
For use with fluids that
meet at least one of the
following conditions:
The fluid has a flash
point above 140
F
(60
C) and a maxi-
mum organic solvent
concentration of 20%,
by weight, per ASTM
Standard D93.
The fluid does not
sustain burning when
tested per ASTM
Standard D4206 Sus-
tained Burn Test.
Category
Data
Wetted Parts
Stainless Steel, Brass,
Nylon, Acetal, PTFE,
Fluoroelastomer, PTFE
High Molecular Weight
Polyethylene, Ceramic
Typical Noise Level with
atomization air at 40 psi
(280 kPa, 2.8 bar) and
typical air flow
Sound Pressure
Sound Power
87 Db(A)
90.4 Db(A)
Maximum Noise Level
with atomization air at
100 psi (0.7 MPa, 7 bar)
and maximum air flow
Sound Pressure
Sound Power
99 Db(A)
105.4 Db(A)
Sound pressure was measured per Cagi Pneurop, 1969.
Sound power was measured per ISO–3744, 1981.
*
Voltage output when used with Graco H
2
O PRO is 0–59
kV due to bleed resistor current draw.
Viton
is a registered trademark of the
DuPont Co.
Loctite
is a registered trademark of the Loctite Corporation.
Summary of Contents for 222700
Page 50: ...50 308584 N ...
