Graco 202844 Evenflo Instructions Manual Download Page 2

2

306479

Table of Contents

Warnings

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operation

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Service

6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts Drawing

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts List

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Graco Warranty

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Graco Information

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

D

This equipment is for professional use only.

D

Read all instruction manuals, tags, and labels before operating the equipment.

D

Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

D

Do not alter or modify this equipment.

D

Check equipment daily. Repair or replace worn or damaged parts immediately.

D

Handle hoses carefully. Do not pull on hoses to move equipment.

D

Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 66

_

C (150

_

F) or below –40

_

C (–40

_

F).

D

Comply with all applicable local, state, and national fire, electrical, and safety regulations.

PRESSURIZED EQUIPMENT HAZARD

Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin
and cause serious injury.

D

Do not stop or deflect leaks with your hand, body, glove or rag.

D

Tighten all fluid connections before operating the equipment

D

Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.

Summary of Contents for 202844 Evenflo









Reviews: