2
309059
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as
cabinet shops or other “factory” or fixed locations. If you intend to use this equipment in this type of
application, you must comply with NFPA 33 and OSHA requirements for the use of flammable and
combustible materials.
The following are general Warnings related to the safe setup, use, maintenance and repair of this equipment.
Additional, more specific warnings may be found throughout the text of this manual where applicable.
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help
prevent fire and explosion:
D
Use equipment only in well ventilated area.
D
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop clothes (potential static arc).
D
Sprayer generates sparks. When flammable liquid is used in or near sprayer or for flushing or
cleaning, keep sprayer at least 20 ft (6 m) away from explosive vapors.
D
Do not clean with materials having flash points lower than 70
_
F (21
_
C). Use water–based materi-
als or mineral spirits type material only. For complete information about your fluid, request the
MSDS from the fluid distributor or retailer.
D
Keep work area free of debris, including solvent, rags and gasoline.
D
Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
D
Ground equipment and conductive objects in work area. Read Grounding instructions.
D
If there is static sparking or you feel a shock, stop operating immediately. Do not use equipment
until you identify and correct the problem.
ELECTRIC SHOCK HAZARD
Improper grounding, setup, or usage of the system can cause electric shock.
D
Turn off and disconnect power cord before servicing equipment.
D
Use only grounded electrical outlets
D
Use only 3–wire extension cords.
D
Ensure ground prongs are intact on sprayer and extension cords.
