Repair
3A8004B
15
Repair
Removal of Switch 3D Gun From
Robot for Repair
NOTE:
Clean the Switch 3D Gun, robot and all parts
surrounding it before removing the Switch 3D Gun.
1. Make sure air and material pressures are relieved.
a. Follow the
b. Follow the
page
2. Disconnect the material inlet hose and the material
return hose. Always use two wrenches when
loosening the high pressure hose connection. See
F
3. Disconnect the 8mm air hose. See F
4. Unplug the cable connectors by either unscrewing
the fitting on the 5 pin cable connector (1001) or
pulling back the locking sleeve on the 18 pin cable
connector (1002). See F
5. Remove the screws that attach the swivel housing
(619) to the anti-rotation bracket.
6. Unscrew the three screws that mount the Switch 3D
Gun to the robot mounting flange. See F
7. The Switch 3D Gun can be now be removed from
the robot.
Switch 3D Gun Disassembly
The Switch 3D Gun can be disassembled after being
removed from the robot. See
1. Remove the nozzle head assembly.
a. Remove the nozzle cap (305/306) with attached
nozzles (302) by removing the M6 button head
screw (307).
b. Nozzle packing (303) can then be removed.
To help prevent serious injury from pressurized fluid,
relieve pressure before cleaning, checking or
servicing the equipment
F
IG
. 7
1001 or
1002
Customer
supplied 8mm
air hose.
Customer supplied
material hoses
F
IG
. 8