How to Spray
16
3A5097C
How to Spray
Take a few moments prior to spraying and
review these tips to ensure your spraying
project is a success.
Adjust Spray Pattern
Set air cap to position for spray pattern
desired.
Adjust Flow and Pattern Size
Edge II (Model 17R236)
Flow and pattern size is determined by how
far trigger is pulled.
Edge II (Model 17R351)
Fluid/Air Control:
Flow and pattern size is determined by
adjustment to the Fluid/Air control knob. Set
knob to OFF. Increase flow until desired finish
is attained.
Edge II Plus
Flow and pattern size is determined by
adjustment to the Fluid, Air and Pattern Size
controls.
The turbine motor generates sparks.
These sparks can ignite flammable fumes.
•
Keep sprayer in a well ventilated area.
•
Keep sprayer at least 20 feet (6m) from
spray area. Use additional hose if
necessary.
ti30977a
ti31144a
ti30978a
Edge II Plus
Air Control
Fluid Control
Pattern
Size
ti30979a
Summary of Contents for 17P483
Page 34: ...Notes 34 3A5097C Notes...
