Installation
2
332913A
Installation
NOTE:
To reduce vibration transmitted to the camera,
the camera stand must not touch the G-Flex Floor
Mounting Plate (J).
1.
Assemble the camera stand per illustration.
2.
To mount camera stand, position it in the cutouts in
the G-Flex 155 Floor Mounting Plate (J). The cam-
era stand is designed to be anchored using four 3/8
in. concrete anchor bolts.
3.
Use a concrete drill bit of the size recommended by
the anchor bolt manufacturer. Drill four holes in the
concrete using the camera stand holes as a guide.
Install the anchor bolts per the manufacturer’s
instructions.
4.
A minimum of 1 in. stud length must protrude from
the floor for proper installation.
5.
Install four washers (13) and four nuts (12) provided
to secure the G-Flex 1500 to the concrete surface.
6.
Torque to anchor bolt manufacturer recommenda-
tions.
J
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions.
This manual contains English. MM 332913
Graco Headquarters:
Minneapolis
International Offices:
Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision A - 2014
