14
Installing the Wheels (Continued)
2.
Use the 4 mm Allen wrench to screw in the
shoulder bolts.
Shoulder Bolt
M6 (x2)
4
1. Place the
front wheel base assembly
under the front of the machine with the set
screws
facing the rear.
Set Screw
Front
Wheel Base
Assembly
3
3. Place the machine onto the bottom
carriage, aligning the wheels with the
tracks.
Tip:
See your frame manual for bottom
carriage orientation.
5
Loosen two set screws on one side of the
machine (either the right side or left side)
with the 4 mm Allen wrench
6
4.
Slide the machine up and down the bottom
carriage tracks. The machine should move
smoothly.
5. Check that the machine is centered over the
wheels. If needed, shift the machine from
side to side.
7
8
Out-of-the-Box Assembly
