m908 User Manual, Rev. G
22. CUE/WIDE OUT balanced analog DB25 (Tascam pinout): Analog output signals sourced from
DAC channels 9-16. These outputs can be for speakers in immersive playback systems or for
CUE outputs. CUE outputs have level control, assignable talkback summing, and MON>CUE
routing. MON>CUE sends the Left and Right signal from the current monitor signal to the
CUE output. In the case of multi-channel monitoring the Left and Right signal or a stereo
downmix can be sent to the CUE output.
3.5 RCU Description
The Remote Control Unit is designed to be a seamless interface between the user and the
audio system being controlled. We have carefully selected the display, switches, and encoder to
be long life and provide excellent tactile feedback. All of the necessary information is displayed
on the 1/4WVGA display while the most used functions have dedicated switches. There is a 1/4"
headphone jack on the rear of the RCU for convenient access to the m908s high performance
headphone amplifier.
The RCU sits on a tilting base so it can be adjusted to the most comfortable angle. The built in
talkback microphone on the RCU also doubles as an accurate sound pressure level (SPL) meter.
The RCU is powered from the ACU via the DB15 cable.
3.6 RCU Front Panel Controls
Many of the most used monitoring functions are directly accessed through the push button
switches on the RCU front panel. Primary functions are accessed with a press-release. Where a
switch has more than one function the primary function is indicated with large upper case letters.
The secondary function is indicated in small letters and is accessed with a push-hold of the
switch. Some switches can have secondary functions assigned to them by the user. These
switches do not have lower case labeling.
Page 11 of 135
