Step 6: Prepare the Stand for Hoop Placement
Disassemble the ball swivel unit as described below.
Using the allen wrench (provided) remove the
cap nut from the ball swivel unit.
Remove the top bracket clamp from the
ball swivel unit.
Remove the bottomw bracket
clamp from the ball swivel unit.
Set these parts aside momentarily.
Step 7: Assemble the hoop
Screw the brackets to the inner hoop using the thumb screws and washers.
Place the bottom bracket clamp onto the bottom of the brackets, hold in place.
Place the top bracket clamp onto the top of the brackets, hold in place.
Continue holding the bracket clamps in place on the brackets.
Bottom Bracket Clamp
Top Bracket Clamp
Thumb Screws
Washers
9