background image

17

12  Cleaning and Maintenance

Your Felix is chassis is constructed out of high quality aluminum and steel.  Under normal circumstances,  very little maintenance is 

required to keep it looking good.  However, if you find it getting more dirty or dusty than you like, here are some cleaning tips:  We 

recommend using a little shot of Windex™, applied to a clean,  dry, lint free cloth. Gently wipe all surfaces, taking care not to allow 

the cleaning product to build up around or under the knobs. 

13  Warranty

• 

Grace Design warrants this product to be free of defective parts and workmanship for a period of five years. This warranty 

period begins at the original date of purchase and is transferable to any person who may subsequently purchase the product 

during this time.

• 

This warranty excludes the following conditions: normal wear and tear, misuse, customer negligence, accidental damage, 

unauthorized repair or modification, cosmetic damage and damage incurred during shipment.

• 

During the time of this warranty, Grace Design will repair or replace, at its option, any defective parts or repair defective 

workmanship without charge, provided the customer has appropriate proof of purchase and that the product has its original 

factory serial number.

• 

In order for Grace Design to provide efficient and timely warranty service, it is important that you mail the completed 

warranty registration card enclosed with all of our products within 10 days of the original date of purchase. You may also 

register your product directly with Grace Design by telephone (303-823-8100 Monday-Friday 9:00am to 5:00pm MST), or you 

can register your product online at www.gracedesign.com.

• 

This warranty is in lieu of all other warranties whether written, expressed, or implied, INCLUDING ANY WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

• 

In no event will Grace Design be liable for lost profits or any other incidental, consequential or Exemplary damages, even if 

Grace Design is aware of the possibility of such damages. In no event will Grace Design’s liability exceed the purchase price of 

the product.

• 

This warranty gives the customer specific legal rights. The customer may also have other rights, which vary from state to state. 

Some states do not allow limitations on implied warranties or consequential damages, so some of the limitations of the above 

may not apply to a particular customer.

Summary of Contents for Felix



















Reviews: