background image

General Warranty Information

Grace Industries, Inc. warrants Grace Products to be free from defects in workmanship and materials for a period of one 

year from the date of purchase. This warranty is valid only when the returned products are accompanied by a sales slip or 
other proof of purchase that states the date and location of purchase. Grace Industries, Inc. will not repair or replace any 
merchandise under warranty which has been damaged because of accident, misuse or abuse of the products while in pos-
session or control of the consumer. This warranty is void if any attempt to repair or replace parts was made or attempted 
by other than qualifi ed Grace Industry’s Inc. personnel. This warranty is void if any of the sealed compartments are opened 
or tampered with. Before sending product to Grace for repair, call for Return Authorization or RA #. Please reference RA# 
in shipping documents for tracking purposes. Send all repair products, prepaid and accompanied by proof of purchase to: 
Grace Industries, Inc., Repair Division, 305 Bend Hill Road, Fredonia, PA 16124. Grace Industries, Inc. shall not be liable 
for any direct, incidental or other consequential loss or damage arising out of the failure of the device to operate. End-user 
or customer is responsible for return shipping/freight charges.

The sole and exclusive remedy under all guarantees or warranties, expressed or implied, is strictly limited to repair or 

replacement as herein provided. All implied warranties, including but not limited to, warranties of fi tness and merchantability, 
are hereby limited in duration to a period ending one (1) year from the date of purchase. The warranty and liability set forth 
in the prior paragraphs are in lieu of all other warranties, expressed or implied, in law or in fact, including implied warranties 
of merchantability and fi tness for a particular purpose. Some states do not allow limitations on how long an implied warranty 
lasts, so the above limitations may not apply to you.

This warranty gives you specifi c legal rights and you may also have other rights which may vary from state to state. Tech-

nical assistance is available by contacting Grace Industries, Inc. at 724-962-9231. Product issues may be reported at any 
time to Grace Industries, Inc. at 724-962-9231. 

FCC Statements

Changes or modifi  cations not expressly approved by the party responsible for compliance could void the user’s authority 

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense.

Industry Canada Statements

This Class A digital apparatus complies with Canadian ICES-003. 

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two 

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device. 

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.(select the class for your device)

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’ex-

ploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur 
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le 
fonctionnement.

© Grace Industries, Inc.

Printed in U.S.A.

P/N: MS900-H-R UI 1117

305 Bend Hill Road

Fredonia, PA  16124 U.S.A.

724-962-9231

www.graceindustries.com

Summary of Contents for MS900 Series









Reviews: