P.4
1.
Connect the 12V power adaptor to the DC input jack on the bottom of
each speaker, then plug into the power wall outlet. You may also
insert 6 x ‘AA’ size
ALKALINE batteries into the battery compartment. Ensure the batteries polarity (+/-)
are correct, at the bottom of the speakers
(batteries not included in the package).
2. Press the POWER button and turn the speakers ON. The POWER LED will light
up in blue. Switch off the speakers by pressing the POWER button on the
speaker, and the LED will turn off.
OPERATION
1. Turn on the audio source to which the transmitter is connected with.
2. Turn on the transmitter by set the
POWER switch
to ON position, and the
3.
POWER LED
on transmitter will light up .
4. Select between the
channels
on the transmitter for best performance for the location
selected.
5.
Press the “POWER” button on the speaker to turn on the speaker Press the
“SCAN”
AUTO-TUNE button
to get the best tuning reception on the speaker. When the
