Rear JK 2d and 4d GraBars Handle Installation Instructions:
Step 1:
Remove the (2) 6mm bolts on the bottom side of the roll bar using a 10mm socket.
Step 2:
NOTE: We recommend adding a drop of oil or WD-40 to the bolts before installing to remove the thread
locker Jeep puts in the threads from the factory.
Install the rear handle with the bend facing the front of the Jeep using the (2) M6 bolts supplied with your
order. It works best if you install the front bolt first only threading in a few turns, then install the rear bolt and
using a 5mm hex wrench, tighten both bolts to 120 in--‐lbs of torque.
Repeat steps 1 & 2 for the other side.
Congratulations on installing your new Solid Steel GraBars; we thank you and your family for partnering with
Welcome Distributing! If you have any questions or need any additional help, don’t ever hesitate to contact us!
Please visit our website at
“Like US” on Facebook at