6
Remote
MEM
+
MEM
–
POWER
CLOCK/SLEEP
DISPLAY
ALARM
REPEAT
RANDOM
PROG/MEM
STOP
SOURCE
MUTE
Mute
Press to mute the
volume.
Display
Press to change the
display from media
to clock.
Alarm
Press to set the alarm.
Mem -/+
Press to cycle through
radio memory presets.
Stop
Skip Rev/Fwd
Play/Pause
Power
Press to power the unit
on or off.
Source
Press to change the
media source.
Clock/Sleep
With the unit off, press
to set the clock.
Press to set
the sleep timer.
Repeat
Press to set an audio
track to repeat.
Random
Press to play audio
tracks at random.
Prog/Mem
Press to program
memory presets.
Clock & Alarm
Setting the Clock
1. With the unit powered off, press the Clock Set/Mem
button on the front of the unit, or the Clock/Sleep
button on the remote.
The
hour will begin flashing on
the display.
2. Press the Tuning buttons on the front of the unit, or the
Skip Rev/Fwd buttons on the remote to set the hour.
3. Press the Clock Set/Mem or Clock/Sleep button again.
The minutes will begin flashing on the display.
4. Repeat Step 2 to set the minutes.
5. Press the Clock Set/Mem or Clock/Sleep button again
to finish setting the time.
Setting the Alarm
1. With the unit powered off, press the Alarm button, on
the front of the unit, or the remote. The
hour will begin
flashing on the display.
2. Press the Tuning buttons on the front of the unit, or the
Skip Rev/Fwd buttons on the remote, to set the hour.
3. Press the Alarm button again.
The minutes will begin
flashing on the display.
4. Repeat Step 2 to set the minutes.
5. Press the Alarm button again to set the alarm type:
The
alarm type will begin flashing on the display.
6. Repeat Step 2 to set the alarm type:
Radio, CD or Buzzer.
7. Press the Alarm button again to finish setting the
alarm.
Cancelling/Deactivating the Alarm
1. After the alarm has sounded, press the Alarm button
to cancel it.
2. Press and hold the Alarm button to turn it off entirely.
The alarm indicator on the display will disappear.
Setting the Sleep Timer
1. With the unit powered on, press the Clock/Sleep
button on the remote.
The display will show the amount
of time in minutes before the timer goes off.
2. Press the Clock/Sleep button to select the amount of
time before the timer goes off: 90 minutes, 80, 70, etc.
3. Wait for the display to return to normal.
“Sleep”
will be visible towards the bottom of the display
when the timer is on.
4. To turn the Sleep Timer off, perform Step 2 until the
display reads “OFF”.
