GPX GS26B, User Manual

Page: 8 / 28

2. 3 Calibration
If your scooter seems to pull to the left or right, you may need to recalibrate its sensors. The process requires two levels,
available at any hardware store. Many smartphones have free "bubble level" apps as well.
Step 1: Power off the scooter.
Step 2: Place each level parallel with the wheel touching the inside of the wheel base.
Step 3: Rotate the scooter until both levels on each wheel base are level. If you do not have a level, make sure both
platforms are equal with each other and level to the ground as best as possible.
Step 4: While keeping the scooter level, hold the power button down. The scooter will make the normal power on tone.
Wait 3 seconds and you will hear a single beep. Release the power button. Front LEDs will begin flashing. Power
the scooter off.
Step 5: Power on again. The scooter should now be calibrated. If the scooter is still not calibrated correctly, go to step 1
and begin making minor adjustments.