For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.gpx.com
Customer Service:
1-888-999-4215 |
Email Support:
Email Parts:
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked
questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a
preguntas frecuentes, visite la sección de apoyo en:
www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des
réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur:
www.gpx.com
INTERNATIONAL SUPPORT
Setting the Clock
1. Press the
Power
button to turn the unit off.
2. Press and hold the
Clock Set
button until the display begins to blink,
then release the button.
3. Press the
Tune +/-
buttons to adjust the hour.
Note the PM indicator will
light when the hour is set in the PM.
4. Press the
Clock Set
button.
5. Press the
Tune +/-
buttons to adjust the minute.
6. Press the
Clock Set
button to finish setting the time.
Setting the Alarm
1. Press the
Power
button to turn the unit off.
2. Press and hold the
AL1
or
AL2
button until the display begins to blink,
then release the button.
3. Press the
Tune +/-
buttons to adjust the hour.
Note the PM indicator will
light when the hour is set in the PM.
4. Press the
AL1
or
AL2
button.
5. Press the
Tune +/-
buttons to adjust the minute.
6. Press the
AL1
or
AL2
button.
7. Press the
Tune +/-
buttons to switch between Buzzer, Radio and CD.
The display will indicate the following:
rAd
for Radio,
bU
for Buzzer, and
Cd
for CD.
8. Use the
Vol+/-
buttons to adjust the volume of the alarm, except when
set to Buzzer.
9. Once the set alarm time is reached, the alarm will sound.
10. To set the other alarm, follow the above steps and choose the alarm not
currently set.
Tuning the AM or FM Radio
1. Press the
Power
button to turn the unit on.
2. Press the
Source
button to switch to
Radio mode
, then press the AM/
FM button to select the desired frequency band.
3. Press the
Tune +/-
buttons to adjust the radio to the desired frequency.
4. Press and hold the
Tune +/-
buttons to search for the next available
frequency.
5. Press the
Vol+/-
buttons to adjust the volume.
6. Press the
Power
to turn the radio off.
CLOCK AND SLEEP TIMER
ALARM
RADIO
Disabling the Alarm
Press the
AL1
or
AL2
button until the indicator is no longer lit. The alarm is
not off and will not sound.
Snooze and Alarm Reset
After the alarm sounds:
Press the
Snooze/Dimmer
button to delay the alarm for several minutes.
OR
Press the
Power
button to turn the alarm off until the set alarm
time is reached again.
Saving and Playing a Station as a Preset
1. Tune to the desired frequency.
2. Press & hold the
Preset
button.
3. The display will flash.
4. Press the
Tune +/-
buttons to set as P01 - P10.
5. Press the
Preset
to finish setting the station as a preset.
6. Press the
Stop/Preset
and
Tune +/-
buttons to cycle through preset
radio stations.
Radio Reception
Extend the
FM Antenna
to improve FM radio reception. An AM antenna is
built into the clock radio. To improve AM radio reception, adjust the position
of the clock radio.
Loading and Playing a CD
1. Open the
CD Door
.
2. Place a CD into the unit, label side facing up.
3. Close the
CD Door
.
4. Press the
Source
button to switch to CD mode.
5. Press the
Play/Pause
button to begin playing the loaded CD.
CD
Programming a CD
1. Press the
Stop
button to stop the CD during play.
2. Press the
Program
button.
3.
“PROG”
will begin to blink on the display.
4. Press the
Tune +/-
buttons to select a track.
5. Press the
Program
button to save the selected track to the program.
6. Repeat steps 4 and 5 to program up to 20 tracks.
Using the Audio Input
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the
Line In
Input
on the side of the
unit and the
audio output
on an audio device.
2. Press the
Power
button to turn the unit on.
3. Press the
Source
button to switch to
Line In mode
.
4. Use the native controls on the connected device to play your audio
through the unit.
LINE IN
Setting the Sleep Timer
1. Press the
Power
button to turn the unit on.
2. Press the
Sleep/Random
button to set the sleep timer
(90, 60, 30, 15 min or OFF).
3. Once the set sleep time has expired the clock radio will
automatically power off.
Note: This unit is not compatible with MP3 CDs.
